Preparation and characterization of poly(urethane-siloxane)/titanium-dioxide nanocomposites
Bočna strana članka
Glavni sadržaj članka
Apstrakt
This work is focused on preparation of poly(urethane-siloxane)/titanium-dioxide nanocomposites (PUSNs) with enhanced features. PUSNs were prepared by the in situ polymerization reaction using titanium-dioxide as a nano-filler in different amounts (1, 2, 3 and 5 wt.%) with respect to the poly(urethane-siloxane) (PUS) matrix. PUS copolymer was based on α,ω-dihydroxy-ethoxypropyl-poly(dimethylsiloxane), 4,4-methylenediphenyldiisocyanate and 1,4-butanediole. In order to investigate the influence of TiO2 content on the structure, UV resistance, thermal properties, hydrophobicity and morphology of the prepared PUSNs, FTIR spectroscopy, UV-Vis diffuse-reflectance spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), contact angle measurements, surface free energy (SFE) analysis, water absorption, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were performed. The PUSNs showed excellent UV resistance, high hydrophobicity, low surface free energy and also higher thermal stability and rougher surface and cross-section relief structure as compared to the pure PUS copolymer. Based on the obtained results it can be concluded that prepared PUSNs could be potentially used as protective coatings.
Detalji članka
Broj časopisa
Rubrika
Kada je rukopis prihvaćen za objavlјivanje, autori prenose autorska prava na izdavača. U slučaju da rukopis ne bude prihvaćen za štampu u časopisu, autori zadržavaju sva prava.
Na izdavača se prenose sledeća prava na rukopis, uklјučujući i dodatne materijale, i sve delove, izvode ili elemente rukopisa:
- pravo da reprodukuje i distribuira rukopis u štampanom obliku, uklјučujući i štampanje na zahtev;
- pravo na štampanje probnih primeraka, reprint i specijalnih izdanja rukopisa;
- pravo da rukopis prevede na druge jezike;
- pravo da rukopis reprodukuje koristeći fotomehanička ili slična sredstva, uklјučujući, ali ne ograničavajući se na fotokopiranje, i pravo da distribuira ove kopije;
- pravo da rukopis reprodukuje i distribuira elektronski ili optički koristeći sve nosioce podataka ili medija za pohranjivanje, a naročito u mašinski čitlјivoj/digitalizovanoj formi na nosačima podataka kao što su hard disk, CD-ROM, DVD, Blu-ray Disc (BD), mini disk, trake sa podacima, i pravo da reprodukuje i distribuira rukopis sa tih prenosnika podataka;
- pravo da sačuva rukopis u bazama podataka, uklјučujući i onlajn baze podataka, kao i pravo prenosa rukopisa u svim tehničkim sistemima i režimima;
- pravo da rukopis učini dostupnim javnosti ili zatvorenim grupama korisnika na osnovu pojedinačnih zahteva za upotrebu na monitoru ili drugim čitačima (uklјučujući i čitače elektonskih knjiga), i u štampanoj formi za korisnike, bilo putem interneta, onlajn servisa, ili putem internih ili eksternih mreža.
Kako citirati
Reference
Koberstein JT, Galambos AF. Multiple melting in segmented polyurethane block copolymers. Macromolecules 1992; 25: 5618–5624.
Špírková M, Poręba R, Pavličević J, Kobera L, Baldrian J, Pekárek M. Aliphatic polycarbonate-based polyurethane elastomers and nanocomposites. I. The influence of hard-segment content and macrodiol-constitution on bottom-up self-assembly. J Appl Polym Sci. 2012; 126: 1016–1030.
Byczyński L. Effect of different polyethers on surface and thermal properties of poly(urethane-siloxane) copolymers modified with side-chain siloxane. J Therm Anal Calorim. 2013; 114: 397–408.
Rochery M, Vroman I, Lam TM. Incorporation of poly(dimethylsiloxane) into poly(tetramethylene oxide) based polyurethanes: The effect of synthesis conditions on polymer properties. J Macromol Sci A. 2003; 40: 321–333.
Hernandez R, Weksler J, Padsalgikar A, Runt J. Microstructural organization of three-phase polydimethylsiloxane-based segmented polyurethanes. Macromolecules 2007; 40: 5441–5449.
Adhikari R, Gunatillake PA, McCarthy SJ, Meijs GF. Mixed macrodiol-based siloxane polyurethanes: Effect of the comacrodiol structure on properties and morphology. J Appl Polym Sci. 2000; 78: 1071–1082.
Santiago A, Martin L, Iruin JJ, Fernandez-Berridi MJ, Gonzalez A, Irusta L. Microphase separation and hydrophobicity of urethane/siloxane copolymers with low siloxane content. Prog Org Coat. 2014; 77: 798–802.
Kim DS, Han SJ, Kwak SY. Synthesis and photocatalytic activity of mesoporous TiO2 with the surface area, crystallite size, and pore size. J Colloid Interface Sci. 2007; 316: 85–91.
Reyes-Coronado D, Rodríguez-Gattorno G, Espinosa-Pesqueira ME, Cab C, Coss R, Oskam G. Phase-pure TiO2 nanoparticles: anatase, brookite and rutile. Nanotechnology 2008; 19: 145605–145614.
Xu Dong C, Ming Qiu Z, Zhi W, Zheng Fu L, Yu Liang M. Roles of anatase and rutile TiO2 nanoparticles in photooxidation of polyurethane. Polym Test. 2007; 26: 202–208.
Li K, Peng J, Zhang M, Heng J, Li D, Mu C. Comparative study of the effects of anatase and rutile titanium dioxide nanoparticles on the structure and properties of waterborne polyurethane. Collid Surface A. 2015; 470: 92–99.
Chen J, Zhou Y, Nan Q, Sun Y, Ye X, Wang Z. Synthesis, characterization and infrared emissivity study of polyurethane/TiO2 nanocomposites. Appl Surf Sci. 2007; 253: 9154–9158.
Reid DL, Draper R, Richardson D, Demko A, Allen T, Petersen EL, Seal S. In situ synthesis of polyurethane–TiO2 nanocomposite and performance in solid propellants. J Mater Chem A. 2014; 2: 2313–2322.
Xia H, Wang Q. Preparation of conductive polyaniline/nanosilica particle composites through ultrasonic irradiation. J Appl Polym Sci. 2003; 87: 1811–1817.
da Silva VD, dos Santos LM, Subda SM, Ligabue R, Seferin M, Carone CLP, Einloft S. Synthesis and characterization of polyurethane/titanium dioxide nanocomposites obtained by in situ polymerization. Polym Bull. 2013; 70: 1819–1833.
Sabzi M, Mirabedini SM, Zohuriaan-Mehr J, Atai M. Surface modification of TiO2 nano-particles with silane coupling agent and investigation of its effect on the properties of polyurethane composite coating. Prog Org Coat. 2009; 65: 222–228.
González-Garsía DM, Jurado LT, Jiménez-Gallegos R, Rodríguez-Lorenzo LM. Novel non-cytotoxic, bioactive and biodegradable hybrid materials based on polyurethanes/TiO2 for biomedical applications. Mat Sci Eng C-Bio S. 2017; 75: 375–384.
Pergal MV, Nestorov J, Tovilovic G, Ostojic S, Gođevac D, Vasiljevic-Radovic D, Djonlagic J. Structure and properties of thermoplastic polyurethanes based on poly(dimethylsiloxane): assessment of biocompatibility. J Biomed Mater Res A. 2014; 102: 3951–3964.
Pergal MV, Stefanović IS, Gođevac D, Antić VV, Milačić V, Ostojić S, Rogan J, Djonlagić J. Structural, thermal and surface characterization of thermoplastic polyurethanes based on poly(dimethylsiloxane). J Serb Chem Soc. 2014; 79: 843–866.
Marand A, Dahlin J, Karlsson D, Skarping G, Dalene M. Determination of technical grade isocyanates used in the production of polyurethane plastics. J Environ Monitor. 2004; 6: 606–614.
Van Oss CJ, Good RJ, Chaudhury M.K. Additive and nonadditive surface tension components and the interpretation of contact angles. Langmuir 1988; 4: 884–891.
Stefanović IS, Gođevac D, Špírková M, Jovančić P, Tešević V, Milačić V, Pergal MV. Impact of the poly(propylene oxide)-b-poly(dimethylsiloxane)-b-poly(propylene oxide) macrodiols on the surface related properties of polyurethane copolymers. Hem Ind. 2016; 70: 725–738.
Amrollahi M, Sadeghi MM, Kashcooli Y. Investigation of novel polyurethane elastomeric networks based on polybutadiene-ol/polypropyleneoxide mixture and their structure-properties relationship. Mater Des. 2011; 32: 3933–3941.
Choi T, Weksler J, Padsalgikar A, Runt J. Influence of soft segment composition on phase-separated microstructure of polydimethylsiloxane-based segmented polyurethane copolymers. Polymer 2009; 50: 2320–2327.
Choi T, Weksler J, Padsalgikar A, Runt J. Microstructural organization of polydimethylsiloxane soft segment polyurethanes derived from a single macrodiol. Polymer 2010; 51: 4375–4382.
Yufei C, Zhichao L, Junyan T, Qingyu Z, Yang H. Characteristics and Properties of TiO2/EP-PU Composite. J. Nanomater. 2015; 167150–167156.
Malik M, Kaur R. Mechanical and Thermal Properties of Castor Oil–Based Polyurethane Adhesive: Effect of TiO2 Filler. Adv. Polym. Tech. 2016; 35: 21637–21644.
Wu DM, Qiu FX, Xu HP, Yang DY. Waterborne polyurethane/inorganic hybrid composites: preparation, morphology and properties. Plast Rubber Compos. 2011; 40: 449–456.
Li J, Zheng J, Zhang J, Feng J. Fabrication of TiO2/PU Superhydrophobic Film by Nanoparticle Assisted Cast Micromolding Process. J Nanosci Nanotechno. 2016; 16: 5875–5879.
Shuai Q, Yang X, Luo Y, Tang H, Luo X, Tan Y, Ma M. A superhydrophobic poly(dimethylsiloxane)-TiO2 coated polyurethane sponge for selective absorption of oil from water. Mater Chem Phys. 2015; 162: 94–99.
Zhang S, Chen Z, Guo M, Zhao J, Liu X. Waterborne UV-curable polycarbonate polyurethane nanocomposites based on polydimethylsiloxane and colloidal silica with enhanced mechanical and surface properties. RSC Adv. 2014; 4:30938–30947.