Prediction of oily water separation efficiency by fiber bed using new filter media property
Bočna strana članka
Glavni sadržaj članka
Apstrakt
Bed coalescers are compact, easy to install, automate, and maintain with the ability to achieve high separation efficiencies. They have been increasingly applied in the industry even though their design often requires pilot plant experiments. In this paper, a new wetting property of polymer fibers regarding polar mineral oils was established. This property can be important for selection of filter media for liquid-liquid separation in many industrial applications. Medical oil was selected as the new reference liquid that does not wet the investigated polymers. The lipophilic/lyophobic ratio (LLR) reached values ranging from 3.28 to 18.81 and increased with the increase of the mineral oil polarity measured by the oil neutralization number. The LLR values were in an excellent agreement with the results obtained from the separation efficiency of a steady-state bed coalescer. Thus, simple, fast and inexpensive experiments can replace pilot plant or at least laboratory testing aiming at selecting a polymer for oil separation from wastewater.
Detalji članka
Broj časopisa
Rubrika
Kada je rukopis prihvaćen za objavlјivanje, autori prenose autorska prava na izdavača. U slučaju da rukopis ne bude prihvaćen za štampu u časopisu, autori zadržavaju sva prava.
Na izdavača se prenose sledeća prava na rukopis, uklјučujući i dodatne materijale, i sve delove, izvode ili elemente rukopisa:
- pravo da reprodukuje i distribuira rukopis u štampanom obliku, uklјučujući i štampanje na zahtev;
- pravo na štampanje probnih primeraka, reprint i specijalnih izdanja rukopisa;
- pravo da rukopis prevede na druge jezike;
- pravo da rukopis reprodukuje koristeći fotomehanička ili slična sredstva, uklјučujući, ali ne ograničavajući se na fotokopiranje, i pravo da distribuira ove kopije;
- pravo da rukopis reprodukuje i distribuira elektronski ili optički koristeći sve nosioce podataka ili medija za pohranjivanje, a naročito u mašinski čitlјivoj/digitalizovanoj formi na nosačima podataka kao što su hard disk, CD-ROM, DVD, Blu-ray Disc (BD), mini disk, trake sa podacima, i pravo da reprodukuje i distribuira rukopis sa tih prenosnika podataka;
- pravo da sačuva rukopis u bazama podataka, uklјučujući i onlajn baze podataka, kao i pravo prenosa rukopisa u svim tehničkim sistemima i režimima;
- pravo da rukopis učini dostupnim javnosti ili zatvorenim grupama korisnika na osnovu pojedinačnih zahteva za upotrebu na monitoru ili drugim čitačima (uklјučujući i čitače elektonskih knjiga), i u štampanoj formi za korisnike, bilo putem interneta, onlajn servisa, ili putem internih ili eksternih mreža.
Kako citirati
Reference
Šećerov Sokolović R, Sokolović S, Đoković B. Effect of working conditions on bed coalescence of an oil-in-water emulsion using a polyurethane foam bed. Ind Eng Chem Res 1997; 36: 4949-4953.
Šecerov Sokolović RM, Sokolović DS, Govedarica DD. Liquid-liquid separation using steady-state bed coalescer. Hem Ind 2016; 70(4): 367-381.
Agarwal S, von Arnim V, Stegmaier T, Planck H, Agarwal A. Role of surface wettability and roughness in emulsion separation. Sep Purif Technol 2013; 107: 19-25.
Agarwal S, von Arnim V, Stegmaier T, Planck H, Agarwal A. Effect of fibrous coalescer geometry and operating conditions on emulsion separation. Ind Eng Chem Res 2013; 52: 13164-13170.
Du Y, Shen C, Zhang H, Huang Y. Effects of flow velocity and nonionic surfactant on colloid straining in saturated porous media under unfavorable conditions. Transp Porous Med 2013; 98: 193-208.
Šećerov Sokolović R, Vulić T, Sokolović S, Marinković-Nedučin R. Effect of fibrous bed permeability on steady-state coalescence. Ind Eng Chem Res 2003; 42: 3098-3102.
Šećerov Sokolović RM, Govedarica DD, Sokolović DS. Selection of filter media for steady-state bed coalescers, Ind Eng Chem Res. 2014; 53: 2484-2490.
Zhou YB, Chen L, Hu XM, Lu J. Modified resin coalescer for oil-in-water emulsion treatment: Effect of operating conditions on oil removal performance. Ind Eng Chem Res. 2009; 48: 1660-1664.
Bansal S, von Arnim V, Stegmaier T, Planck H. Effect of fibrous filter properties on the oil-in-water-emulsion separation and filtration performance. J Hazard Mater. 2011; 190: 45-50.
Dawar S, Chase GG. Correlations for transverse motion of liquid drops on fibers. Sep Purif Technol. 2010; 72: 282-287.
Elimelech M, O'Melia CR. Kinetics of deposition of colloidal particles in porous media. Environ Sci Technol. 1990; 24: 1528-1536.
Elimelech M, Gregory J, Jia X, Williams RA. Particle Deposition and Aggregation: Measurement, Modeling and Simulation, Butterworth-Heinemann, Woburn, 1998.
Hu D, Li X, Li L, Yang C. Designing high-caliber nonwoven filter mats for coalescence filtration of oil/water emulsions. Sep Purif Technol. 2015; 149: 65-73.
Hu D, Li L, Li Y, Yang C. Restructuring the surface of polyurethane resin enforced filter media to separate surfactant stabilized oil-in-water emulsions via coalescence. Sep Purif Technol. 2017; 172: 59-67.
Zang D, Liu F, Zhang M, Gao Z, Wang C. Novel superhydrophobic and superoleophilic sawdust as a selective oil sorbent for oil spill cleanup. Chem Eng Res Des. 2015; 102: 34-41.
Zang D, Liu F, Zhang M, Niu X, Gao Z, Wang C. Superhydrophobic coating on fiberglass cloth for selective removal of oil from water. Chem Eng J. 2015; 262: 210-216.
Yang B, Chang Q, He C, Zhang Y. Wettability study of mineral wastewater treatment filter media. Chem En. Process. 2007; 46: 975-981.
Govedarica D., Šećerov-Sokolović R, Kiralj I, Govedarica O, Sokolović D, Hadnađev-Kostić M. Separation of mineral oil droplets using polypropylene fibre bed coalescence, Hem Ind. 2015; 69(4): 339-345.
Krasinski A. Separation of oil-in-water emulsions using polymer coalescence structures. Environ Prot Eng. 2016; 42: 19-39.
Mead-Hunter R, Bergen T, Becker T, O'Leary RA, Kasper G, Mullins BJ. Sliding/rolling phobic droplets along a fiber: Measurement of interfacial forces. Langmuir 2012; 28: 3483-3488.
Viswanadam G, Chase GG. Contact angles of drops on curved superhydrophobic surfaces. J Colloid Interface Sci. 2012; 367: 472-477.
Sokolović D, Govedarica D, Šećerov-Sokolović RM. Influence of fluid properties and solid surface energy on efficiency of bed coalescence. Chem Ind Chem Eng Q. 2017; DOI 10.2298/CICEQ170304034S
Li Y, Zhang Z, Ge B, Men X, Xue Q. A versatile and efficient approach to separate both surfactant-stabilized water-in-oil and oil-in-water emulsions. Sep Purif Technol. 2017; 176: 1-7.
Lu H, Yang Q, Liu S, Xie L-S, Wang HL. Effect of fibrous coalescer redispersion on W/O emulsion separation. Sep Purif Technol. 2016; 159: 50-56.
Kulkarni PS, Patel SU, Patel SU, Chase GG. Coalescence filtration performance of blended microglass and electrospun polypropylene fiber filter media. Sep Purif Technol. 2014; 124: 1-8.
Patel SU, Kulkarni PS, Patel SU, Chase GG. The effect of surface energy of woven drainage channels in coalescing filters. Sep Purif Technol. 2012; 87: 54-61.
Yeom C, Kim Y. Purification of oily seawater/wastewater using superhydrophobic nano-silica coated mesh and sponge. J Ind Eng Chem. 2016; 40: 47-53.
Wang J, Geng G, Liu X, Han F, Xu J. Magnetically superhydrophobic kapok fiber for selective sorption and continuous separation of oil from water. Chem Eng Res Des. 2016; 115: 122-130.
Li Y, Cao L, Hu D, Yang C. Uncommon wetting on a special coating and its relevance to coalescence separation of emulsified water from diesel fuel. Sep Purif Technol. 2017; 176: 313-322.
Tufenkji N, Elimelech M. Correlation equation for predicting single-collector efficiency in physicochemical filtration in saturated porous media. Environ Sci Technol. 2004; 38: 529-536.
Kulkarni PS, Patel SU, Chase GG. Layered hydrophilic/hydrophobic fiber media for water-in-oil coalescence. Sep Purif Technol. 2012; 85: 157-164.