EXERGY ANALYSIS OF THE BIOGAS MULTISTAGE COMPRESSION PROCESS BASED ON ASPEN PLUS SIMULATION
Scientific paper
DOI:
https://doi.org/10.2298/CICEQ210822006ZKeywords:
Aspen Plus, Biogas, Exergy analysis, Multistage compressionAbstract
In this study, by taking the compression separation process of a biogas project as a research subject, a multistage compression process was simulated using Aspen Plus software. The exergy analysis of the biogas project under multistage compression and adiabatic or isothermal conditions was performed employing the thermodynamic principle. The results showed that the biogas exergy increased with pressure during the compression process and correspondently decreased in the interstage cooling process. Further, the compression series increased with the increase in efficiency, but the increase was gradual. The results of the example study of the four-stage compression process are as follows: the process exergy increased by ~83.07 kW, the process exergy efficiency was ~75.56%, and the recovery exergy potential was ~12.6 kW. In this study, the allocation of compression ratios and the selection of compression stages within the multistage compression process were analyzed by Aspen Plus was used to analyze., This analysis can ultimately help others design efficient multistage compression systems that reduce energy losses.
References
Y. Yuan, Z. Liu, L. Zhao, J. Luo, S. Tang, Y. Zhang, Jiangsu Nong Ye Ke Xue (China) 49 (2021) 28—33.
J. Li, B. Li, W. Xu, Zhongguo Zhao Qi (China) 36 (2018) 3—10.
J. Li, W. Xu, B. Li, D. Zhang, Renewable Energy Resour. 38 (2020) 1563—1568.
X. Xing, R. Wang, N. Bauer, P. Ciais, S. Xu, Nat. Commun. 12 (2021) 31591.
H. Wang, F. Huang, K. Ma, Y. Zhang, Z. Zeng, Zhongguo Zhao Qi 27 (2009) 24—26.
J. Zhao, X. Fan, C. Qiu, C. Wang, N. Liu, D. Wang, S. Wang, L. Sun, Environ. Eng. (Beijing, China)38 (2020) 143—148.
I. Khan, M. Othman, Dzarfan, H. Hashim, T. Matsuura, A Ismail, M. Rezaei-Dasht Arzhandi, I. Azelee, Energy Convers. Manage. 150 (2017) 277—294.
O. Maakoul, R. Beaulanda, H. Omari, E. Essabri, A. Abid, E3S Web Conf. (2021) p. 234.
Y. Han, H. Winston, J. Membr. Sci. (2021). 628.
P. Sutrisna, E. Savitri, J. Polym. Eng. 40 (2020) 459—467.
S. García, L. Rodríguez, D. Martínez, F. Córdova, N. Guzmán, J. Cleaner Prod. 286 (2020) 124940.
K. Li, F. Deng, K. Wei, X. Ma, F. Huang, Contemp. Chem. Ind. 45 (2016) 1159—1162.
G. Tang, X. Hu, J. Zhao, Y. Chen, F. Huang, Contemp. Chem. Ind. 46 (2017) 983—986, 990.
K. Nachtmann, J. Hofmann, J. Paetzold, S. Baum, H. Bernhardt, Mod. Agri. Sci. Technol. 1 (2015) 1—7.
G. Xu, Y. Yang, L. Duan, N. Wang, L. Tian, PaoJ. Eng. Thermophys. (Beijing, China) 31 (2010) 1643—1646.
S. Zhou, Y. Dong, Y. Zhang, H. Sun, Trans. Chin. Soc. Agric. Mach.42 (2011) 111—116.
A.Yousef, W. Maghlany, Y. Eldrainy, A. Attia, Fuel, 251 (2019) 611—628.
L. Sun, Chemical Process Simulation Training, Chem. Ind. Press, Beijing (2012), p. 2—5.
W. Mao, Study on Recovery and Utilization of Waste Heat between Compressor Stages, 2015, Zhengzhou Univ.
Z. Chen, Advanced engineering thermodynamics, Univ. of Sci. Technol. of China Press, Hefei(2014), p. 31—70.
C. Li, Y. Gao, S. Xia, Q. Shang, P. Ma, Trans. Tianjin Univ.25 (2019) 540—548.
Y. Zhang, Q. Zhang, Comput. Appl. Chem. (China), 35 (2018) 711—718.
Y. Zhang, X. Xu, Xinjiang Hua Gong.(China) 3(2001) 47-49. http://qikan.cqvip.com/Qikan/Article/ReadIndex?id=5477078&info=5vrDCRzniLBCtGqX9kJposoAfxjfRfntka7QR0E5IqY%3d.
W. Guo, H. Lu, X. Wang, B. Zhang, Q. Chen, Pet. Process. Petrochem, 50 (2019) 69—74.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
