FOAMED GEOPOLYMER WITH CUSTOMIZED PORE STRUCTURE
Scientific paper
DOI:
https://doi.org/10.2298/CICEQ211007003BKeywords:
Catalyst Support, Geopolymer,, Heat Insulator, Mechanical property, Porous material, Thermal conductivityAbstract
Due to their favorable production conditions and promising properties (e.g., low shrinkage after foaming, mechanical and chemical stability, high-temperature resistance), geopolymer foams are suitable for heat- and sound insulating refractory building materials. Another promising field of application may be their use as catalyst supports in water treatment. Metakaolin-based foams were prepared by a direct foaming process with high total porosity (> 75 vol%), low bulk density (< 500 kg/m3), approximately 1 MPa compressive strength, and low thermal conductivity (0.095 W/mK). By varying the concentration of foaming agent (H2O2 solution) and stabilizing agent (sodium oleate), it is possible to produce foams with designed porosity and pore size distribution. Foams with mainly closed pores are suitable for thermal insulation, while those with significantly open pores can use as catalyst supports. The computed tomography images showed that the concentration of stabilizing agent is a key parameter in forming a homogeneous pore structure and open pores; up to 24 vol% open porosity can be achieved without significantly affecting other properties. The physical properties of the foams are equally influenced by the thickness of cell walls and the size of the cells themselves.
References
M. Scheffler, C. Paolo, Cellular ceramics: structure, manufacturing, properties and applications, Wiley-VCH, Weinheim (2006).
M. Nodehi, Innov. Infrastruct. Solut. 6 (2021) 231.
C. Shi, D. Roy, P. Krivenko, Alkali-activated cements and concretes, CRC press, Boca Raton (2003).
I. Garcia-Lodeiro, A. Palomo, A. Fernández-Jiménez, in Handbook of alkali-activated cements, mortars and concretes, F. Pacheco-Torgal, J.A. Labrincha, C. Leonelli, A. Palomo, P. Chindaprasirt, Woodhead Publishing, Cambridge (2015), pp. 19—47.
Z. Zhang, J.L. Provis, A. Reid, H. Wang, Constr. Build. Mater. 56 (2014) 113—127.
Z. Abdollahnejad, F. Pacheco-Torgal, T. Félix, W. Tahri, J.B. Aguiar, Constr. Build. Mater. 80 (2015) 18—30.
V. Ducman, L. Korat, Mater. Charact. 113 (2016) 207—213.
V. Vaou, D. Panias, Miner. Eng. 23 (2010) 1146—1151.
A. Hajimohammadi, T. Ngo, P. Mendis, T. Nguyen, A. Kashani, J.S. van Deventer, Mater. Des. 130 (2017) 381—391.
A. Hajimohammadi, T. Ngo, P. Mendis, J. Sanjayan, Mater. Des. 120 (2017) 255—265.
M. Şahin, S.T. Erdoğan, Ö. Bayer, Constr. Build. Mater. 181 (2018) 106—118.
Z. Liu, N.N. Shao, T.Y. Huang, J.F. Qin, D.M. Wang, Y. Yang, Int. J. Miner., Metall. Mater. 21 (2014) 620—626.
W.D. Rickard, L. Vickers, A. Van Riessen, Appl. Clay Sci. 73 (2013) 71—77.
J.G. Sanjayan, A. Nazari, L. Chen, G.H. Nguyen, Constr. Build. Mater. 79 (2015) 236—244.
M.S. Cilla, M.R. Morelli, P. Colombo, Ceram. Int., 40 (2014) 13585—13590.
M.S. Cilla, M.R. Morelli, P. Colombo, J. Eur. Ceram. Soc. 34 (2014) 3133—3137.
F. Colangelo, G. Roviello, L. Ricciotti, V. Ferrándiz-Mas, F. Messina, C. Ferone, O. Tarallo, R. Cioffi, C.R. CheesemanCem. Concr. Compos. 86 (2018) 266—272.
P. Duan, L. Song, C. Yan, D. Ren, D., Z. Li, Ceram. Int. 43 (2017) 5115—5120.
P. Posi, C. Teerachanwit, C. Tanutong, S. Limkamoltip, S. Lertnimoolchai, V. Sata, P. Chindaprasirt, Mater. Des. 52 (2013) 580—586.
M. Mastali, P. Kinnunen, H. Isomoisio, M. Karhu, M. IllikainenConstr. Build. Mater. 187 (2018) 371—381.
L. Korat, V. Ducman, Cem. Concr. Compos. 80 (2017) 168—174.
L. Zhang, F. Zhang, M. Liu, X. Hu, Chem. Eng. J. 313 (2017) 74—82.
R.M. Novais, G. Ascensão, N. Ferreira, M.P. Seabra, J.A. Labrincha, Ceram. Int. 44 (2018) 6242—6249.
G. Masi, W.D.A. Rickard, L. Vickers, M.C. Bignozzi, A. Van Riessen, Ceram. Int. 40 (2014) 13891—13902.
M. Łach, K. Korniejenko, J. Mikuła, Procedia Eng. 151 (2016) 410—416.
C. Bai, G. Franchin, H. Elsayed, A. Conte, P. Colombo, J. Eur. Ceram. Soc. 36 (2016) 4243—4249.
C. Bai, T. Ni, Q. Wang, H. Li, P. Colombo, J. Eur. Ceram. Soc. 38 (2018) 799—805.
C. Bai, G. Franchin, H. Elsayed, A. Zaggia, L. Conte, H. Li, P. Colombo, J. Mater. Res. 32 (2017) 3251—3259.
I. Balczár, T. Korim, A. Dobrádi, Constr. Build. Mater. 93 (2015) 983—988.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
