OPTIMAL DISSOLUTION AND VISCOELASTIC BEHAVIOR OF POLYAMIDE-66 IN FORMIC ACID FOR MEMBRANE FABRICATION
Scientific paper
DOI:
https://doi.org/10.2298/CICEQ210320032AKeywords:
optimization, polyamide-66, polymeric membrane, RSM, viscosityAbstract
High-performance polymeric membrane technology is rapidly developing worldwide with the introduction of new materials and processes. Considerable research efforts are being made to establish a polymer membrane that can be used for ultrafiltration (UF) or nanofiltration (NF) applications. The development of modified polyamide-66 polymer and its compatibility in wastewater are essential elements in the quest for advances and improvements in membrane technology. The optimized conditions for membrane synthesis are critical in making it commercially viable. Response Surface Methodology (RSM) was used to find the optimum dissolution of polyamide-66 in formic acid. A model was developed and validated with experimental data, and it showed good agreement with R2 0.9984. The optimized condition for minimizing viscosity was determined. For minimum viscosity (3.64 cp), the optimum temperature and wt.% were 20 °C and 0.6, respectively.
References
H.H. Wang, J.T. Jung, J.F. Kim, S. Kim, E. Drioli, Y.M. Lee, J. Membr. Sci. 574 (2019) 44-54.
H.B. Kostenbauder, H.G. Boxenbaum, P.P. Deluca, J. Pharm. Sci. 58 (1969) 753-757.
A. Al Mayyahi, Membranes 8 (2018) 68.
K.P. Lee, T.C. Arnot, D. Mattia, J. Membr. Sci. 370 (2011) 1-22.
B. Tarboush, D. Rana, T. Matsuura, H. Arafat, R. Narbaitz, J. Membr. Sci. 325 (2008) 166-175.
L. Li, S. Zhang, X. Zhang, G. Zheng, J. Membr. Sci. 289 (2007) 258-267.
S. Peng, L. Peng, C. Yi, W. Zhang, X. Wang, J. Polym. Sci., Part A: Polym. Chem. 56 (2018) 959-967.
J. Chen, C. Gong, C. Yang, C. Yi, J. Mater. Sci. 56 (2021) 12018-12029.
T.-S.N. Chung, Fabrication of Hollow-Fiber Membranes by Phase Inversion, Advanced Membrane Technology and Applications 2008, pp. 821-839.
P.R. Saunders, J. Polym. Sci. 57 (1962) 131-139.
M.A. Aroon, A.F. Ismail, M.M. Montazer-Rahmati, T. Matsuura, Sep. Purif. Technol. 72 (2010) 194-202.
P.R. Saunders, J. Polym. Sci. 43 (1960) 273-275.
D. Hou, H. Fan, Q. Jiang, J. Wang, X. Zhang, Sep. Purif. Technol. 135 (2014) 211-222.
A. Idris, I. Ahmed, J. Appl. Polym. Sci. 108 (2008) 302-307.
I. Alghoraibi, Int. J. Chemtech Res. 7 (2014) 20-27.
N. Li, Y. Hu, Y.-Z. Lu, R.J. Zeng, G.-P. Sheng, Sci. Rep. 6 (2016) 26115.
O. Chavalparit, M. Ongwandee, J. Environ. Sci. 21 (2009) 1491-1496.
S. Opricovic, G.-H. Tzeng, Eur. J. Oper. Res. 156 (2004) 445-455.
M. Behzadian, R.B. Kazemzadeh, A. Albadvi, M. Aghdasi, Eur. J. Oper. Res. 200 (2010) 198-215.
G.E. Box, N.R. Draper, Empirical Model-building and Response Surfaces, John Wiley & Sons, New York (1987).
A.I. Khuri, S. Mukhopadhyay, WIREs Comput. Stat. 2 (2010) 128-149.
A. Abdulrahman, A. Ali, A. Alfazazi, Arab. J. Sci. Eng. 46 (2021) 6609-6617.
R. Lin, G. Yin, Contemp. Clin. Trials 44 (2015) 33-35.
S.E.I. Lebouachera, M.A. Ghriga, G.B. Salha, H.E. Hadri, M. Hasanzadeh, N. Drouiche, S. Reynaud, B. Grassl, J. Polym. Res. 28 (2021) 135.
H. Abadikhah, F. Zokaee Ashtiani, A. Fouladitajar, Desalination Water Treat. 56 (2015) 2783-2796.
N. Lashari, T. Ganat, D. Otchere, S. Kalam, I. Ali, J. Pet. Sci. Eng. 205 (2021) 108800.
D. Asante-Sackey, S. Rathilal, L. V. Pillay, E. Kweinor Tetteh, Processes 8 (2020) 160.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Abulhassan Ali, Khuram Maqsood, Aymn Abdulrahman, A. S. Alsaadi, Abdullah Bin Mahfouz
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
