TWO-PHASE LEACHING FOR METAL RECOVERY FROM WASTE PRINTED CIRCUIT BOARDS: STATISTICAL OPTIMIZATION

Scientific paper

Authors

  • Murugesan Manikkampatty Palanisamy Department of Food Technology, Excel Engineering College, TN, India https://orcid.org/0000-0001-9057-9383
  • Kannan Kandasamy Department of Chemical Engineering, Kongu Engineering College, TN, India
  • Venkata Ratnam Myneni Department of Chemical Engineering, Mettu University, Ethiopia

DOI:

https://doi.org/10.2298/CICEQ210115022M

Keywords:

Aqua regia, E-Waste, Printed Circuit Board, Response surface methodology, Two step Leaching

Abstract

The rapid growth of technology is inevitable in humankind’s life and has a significant stint in electronic waste (e-waste) generation. Electronic waste possesses tremendous environmental and health effects, and one such major contributor to it is printed circuit boards (PCBs). The present work deals with the recovery of heavy metals from PCBs by using aqua regia as a leaching reagent in two stages (first stage HCl and HNO3 and second stage HCl and H2SO4). The response surface methodology was used to determine the optimal recovery conditions for the heavy metal ions: the recovery time of 5 h, the pulp density of 25 g/L, and the temperature of 90.1 °C with desirability 0.761. These optimized values provide a maximum recovery rate of Cu (97.06%), Sn (94.66%), Zn (96.64%), and Pb (96.89%), respectively. EDXs are used to analyze the metal concentrations of the sample before and after treatment.

References

H. Yang, J. Liu, J. Yang, J. Hazard. Mater. 187 (2011) 393–400.

L. Wei, Y. Liu, Procedia Environ. Sci. 16 (2012) 506–514.

M.F. Bari, N. Begum, S.B. Jamaludin, S.B. Hamaludin, Proc. Malays. Metall. Conf., Univ. Malays. Perlis, Malaysia (2009) p. 1-4.

L. Flandinet, F. Tedjar, V. Ghetta, J. Fouletier, J. Hazard. Mater. 1 (2012) 485-490.

L.A. Castro, A.H. Martins, Braz. J. Chem. Eng. 26 (2009) 649–657.

S. Gupta, G. Modi, R. Saini, Int. Ref. J. Eng. Sci. 3 (2014) 05-17.

D. Jian-Jun, W.E.N. Xue-Feng, Z. Yue-Min, Int. J. Min. Sci. Technol.18 (2008) 454–458.

C. Frazzoli, O. Ebere, R. Dragone, A. Mantovani, Environ. Impact Assess. Rev. 30 (2010) 388–399.

J. Zhang, Y. Jiang, J. Zhou, B. Wu, Y. Liang, Z. Peng, D. Fang, B. Liu, H. Huang, C. Wang, F. Lu, Environ. Sci. Technol. 44 (2010) 3956–3962.

X. Xu, H. Yang, A. Chen, Y. Zhou, K. Wu, J. Liu, Y. Zhang, X. Huo, Reprod. Toxicol. 33 (2012) 94–98.

X. Huo, L. Peng, X. Xu, L. Zheng, B. Qiu, Z. Qi, B. Zhang, D. Han, Z. Piao, Environ. Heal. Perspect. 115 (2007) 1113–1117.

M.A. Barakat, Hydrometallurgy 49 (1998) 63–73.

Y. Guo, X. Huo, Y. Li, K. Wu, J. Liu, J. Huang, G. Zheng, Q. Xiao, H. Yang, Y. Wang, A. Chen, X. Xu, Sci. Total Environ. 408 (2010) 3113–3117.

K. Huang, J. Guo, Z. Xu, J. Hazard. Mater. 164 (2009) 399–408.

Y. Li, X. Huo, J. Liu, L. Peng, W. Li, X. Xu, Environ. Monit. Assess. 177 (2011) 343–351.

V. Grudić, I. Bošković, A. Gezović, Chem. Biochem. Eng. Q. 32 (2018) 299–305.

M. Chen, J. Huang, O.A. Ogunseitan, N. Zhu, Y. Wang, J. Waste Manage. 41 (2015) 142-147.

I. Masavetas, A. Moutsatsou, E. Nikolaou, S. Spanou, A. Zoikis-Karathanasis, E.A. Pavlatou, Glob. NEST J. 11(2009) 241-247.

H. Li, J. Eksteen, E. Oraby, Resour. Conserv. Recycl. 139 (2018) 122–139.

R. Montero, A. Guevara, E. De La Torre, Int. J. Earth Sci. Eng. 2 (2012) 590-595.

J. Ficeriova, P. Baláž, E. Gock, Acta Montan. Slovaca. 16 (2011) 128-131.

R. Vijayaram, K. Chandramohan Res. J. Eng. Sci. 4 (2013) 2–4.

R. Vijayaram , D. Nesakumar, K. Chandramohan, Res. J. Eng. Sci. 2 (2013) 11-14.

M.P Murugesan, K. Kannan, J. Ceram. Process. Res. 21 (2020) 75 – 85.

M.P Murugesan, K. Kannan, T. Selvaganapathy, Mater. Today Proc. 26 (2020) 2720 - 2728l.

E. Kantarelis, W. Yang, W. Blasiak, C. Forsgren, A. Zabaniotou, Appl. Energy 88 (2011) 922–929.

A. Tripathi, M. Kumar, D.C. Sau, A. Agrawal, S. Chakravarty, Int. J. Metall. Eng. 1 (2012) 17–21.

E.Y. Yazici, H. Deveci, Hydrometallurgy. 139 (2013) 30– 38.

G. Zheng, X. Xu, B. Li, K. Wu, T.A. Yekeen, X. Huo, J. Exposure Sci. Environ. Epidemiol. 23 (2012) 67–72.

C. Li, F. Xie, Y. Ma, T. Cai, H. Li, Z. Huang, G. Yuan, J. Hazard. Mater. 178 (2010) 823–833.

P. Sivakumar, D. Prabhakaran, M. Thirumarimurugan, Bioinorg. Chem. Appl.1 (2018) 1-10.

Z. Ping, F. Zeyun, L. Jie, L. Qiang, Q. Guangren, Z. Ming,

J. Hazard. Mater. 166 (2009) 746–750.

M. Kumar, J.C. Lee, M.S. Kim, J. Jeong, K. Yoo, Environ. Eng. Manag. J. 13 (2014) 2601-2607.

C. Wang, F. Lu, Environ. Sci. Technol. 44 (2010) 3956–3962.

Q. Wang, B. Gao, L. Chen, J. Environ. Sci. Health, Part A: Environ. Sci. Eng. 1 (2011) 37–41.

P. Zhu, Y. Chen, L.Y. Wang, M. Zhou, Waste Manage. 32 (2012) 1914–1918.

Downloads

Published

15.06.2021 — Updated on 03.05.2022

Issue

Section

Articles

How to Cite

TWO-PHASE LEACHING FOR METAL RECOVERY FROM WASTE PRINTED CIRCUIT BOARDS: STATISTICAL OPTIMIZATION: Scientific paper. (2022). Chemical Industry & Chemical Engineering Quarterly, 28(2), 103-113. https://doi.org/10.2298/CICEQ210115022M

Similar Articles

51-60 of 60

You may also start an advanced similarity search for this article.