EFFECT OF DIFFERENT CARBON SOURCES ON VACUUM CARBOTHERMAL REDUCTION OF LOW-GRADE PHOSPHORUS ORE
Scientific paper
DOI:
https://doi.org/10.2298/CICEQ210219013HKeywords:
Vacuum carbothermal reduction, FactSage, carbon sources, low-grade phosphate oreAbstract
In this study, the effect of different carbon sources on the carbothermal reduction of low-grade phosphate ore were examined using FactSage 7.2 calculations and vacuum reduction experiments. The thermodynamic calculations showed that the trend of the effect for three types of reducing agents was generally consistent under 1 Pa pressure and 14 % carbon dosage. The reduction effect was maximum when graphite was used as the reducing agent, and a maximum mass of P was obtained at 1250 °C. The vacuum experiment results showed that the reduction and volatilization ratios of phosphate rock increased with temperature for different carbon sources. Maximum reduction ratio was obtained using graphite in the temperature range 1250-1300 °C. The reduction effect of pulverized coal was optimal at 1350 °C, when SiO2, Al2O3 and MgO in the pulverized coal ash were exposed to form low-melting eutectics with CaO due to the increased degree of reaction, and the heat and mass transfer rates were increased. At this time, a maximum reduction ratio of 51.77 % of the sample and a maximum volatilization ratio of 82.44% of P were achieved. Considering the cost-effectiveness, pulverized coal was the optimum carbon source for the treatment of low-grade phosphate rock using vacuum carbothermal reduction.
References
G.Y. Zheng, R.F. Cao, Y. Li, Z.J. Chen, Silicon-Neth. (2019) 1-10
Q.B. Cao, J.H. Cheng, S.M. Wen, C.X. Li, S.J. Bai, D. Liu, Miner. Eng. 78 (2015) 114-121
H.Q. Zhang, F. Zhou, X. Xu, L.B. Xiao, Y.F. Jin, H. Yu, J. Wuhan Univ. Technol., Mater. Sci. Ed. 42 (2020) 159-164
M.L. Liu, Chem. Res. App. 21 (2009) 131-134
X.J. Wang, L. Tang, Z. Jiang, Nucl. Eng. Des. 268 (2014) 18-23
J. Jiang, Multipurp. Util. Miner. Resour. 4 (2014) 16-19
R. Kijkowska, Z. Kowalski, D Pawlowska-Kozinska, Z. Wzorek, K. Gorazda, Ind. Eng. Chem. Res. 47 (2008) 6821-6827
C.Y. Zhu, M. Qu, Y. Li, J. Luo, C.J. Fu, J.P. Xia, Bull. Chin. Ceram. Soc. 37 (2018) 2908-2912
Q. Liu, W.Z. Liu, L. Li, R.H. Li, B. Liang, H.R. Yue, S.W. Tang, C. Li, Chin J. Chem. Eng. 26 (2018) 795-805
P. Wu, L Lv, J.F. Li, Liaoning Chem. Ind. 46 (2017) 1176-1178
C. Ma, Y.X. Wu, F. Jin, Q. Li, B. Hu, Chem. Eng. 41 (2013) 74-78
P. Wu, L. Lv, S. Tang, B. Liang, Chin. J. Chem. Eng. 28 (2020) 1824-1831
Z.C. Guo, D.G. Wang, Z.H. Xu, Eng. Chem. Metal. 3 (1994) 189-195
R.Y. Wang, X.P. Yu, Z.C. Guo, X.M. Yang, D.G. Wang, Eng. Chem. Metal. 4 (1997) 76-79
B. Hu, Study on process Optimization and mechanism of phosphate ore smelting reduction, Wuhan University of Engineering, Wuhan, 2014, p. 46
Z.F. Lin, R.M. Hu, X.L. Zhou, J. Chem. Eng. 68 (2017) 26-36
R.F. Cao, Y Li, J.P. Xia, Z.J. Chen, J. Yang, Silicon-Neth. 11 (2019) 2829-2836
Y.C. Liu, Q.X. Li, Z.Z. Qiu, Y.C. Liu, Chin. J. Vac. Sci. Techno. 33 (2013) 293-296
Q.X. Li, L.M. Xia, Y.C. Liu, X.K. Zhou, Y.N. Dai, Ind. Miner. Process. 10 (2008) 14-15
Y.C. Liu, X.M. Chen, Q.X. Li, Y.C. Du, Chin. J. Vac. Sci. Techno. 37 (2017) 89-93
W.P. Yan, L.C. Li, R. Huang, P.S. Liu, K.S. Luo, S.L. Li, S.S. Long, Guangzhou Chem. Ind. 45 (2017) 101-103
X. Qian, R. Huang, P.S. Liu, X.D. Lv, J.Z. Zhang, Chin. J. Vac. Sci. Techno. 37 (2017) 739-743
Q.H. Wu, R. Huang, X.D. Lv, X. Qian, L. Liu, J.Z. Zhang, Mater. Res. Express. 6 (2019) 7-17
X.D. Wei, G.X. Wei, J.H. Xu, W.P. Chen, Sulphur Phosphorus Bulk Mater. Handl. Relat. Eng. 3 (1995) 5-10
J.W. Tang, F.J. Lan, Q.X. Hua, Y. Liu, L. Liu, B.M. Wang, Ind. Miner. Process. 45 (2016) 9-12.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Xuan He, Run Huang
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
