ELECTROCHEMICAL HARVESTING OF MICROALGAE꞉ PARAMETRIC AND COST-EFFECTIVITY COMPARATIVE INVESTIGATION
Original scientific paper
DOI:
https://doi.org/10.2298/CICEQ191213031AKeywords:
electrochemical harvesting, electrocoagulation, microalgae, sacrificial electrode, cost efficiency, energy consumptionAbstract
The cost of microalgae harvesting constitutes a heavy burden on the commercialization of biofuel production. The present study addressed this problem through economic and parametric comparison of electrochemical harvesting using a sacrificial electrode (aluminum) and a nonsacrificial electrode (graphite). The harvesting efficiency, power consumption, and operation cost were collected as objective variables as a function of applied current and initial pH of the solution. The results indicated that high harvesting efficiency obtained by using aluminum anode is achieved in short electrolysis time. That harvesting efficiency can be enhanced by increasing the applied current or the electrolysis time for both electrode materials, where 98% of harvesting efficiency can be obtained. The results also demonstrated that the power consumption with the graphite anode is higher than that of aluminum. However, at 0.2 A the local cost of operation with graphite (0.036 US$/m3) is distinctly lower than that of aluminum (0.08 US$/m3). Furthermore, the harvesting efficiency reached its higher value at short electrolysis time at an initial pH of 6 for aluminum, and at an initial pH of 4 for graphite. Consequently, the power consumption of the harvesting process could be reduced at acid- nature conditions to around 0.46 kWh/kg for aluminum and 1.12 kWh/kg for graphite.
References
S.M.A. Mobin, Energy Procedia 160 (2019) 752–760
D. Moreira, J.C.M. Pires, Bioresour. Technol. 215 (2016) 371–379
S.M.A. Mobin, F. Alam, A Review of Microalgal Biofuels, Challenges and Future Directions, in: M.M.K. Khan, A.A. Chowdhury, N.M.S. Hassan (Eds.), Appl. Thermo-Fluid Process. Energy Syst. Key Issues Recent Dev. a Sustain. Futur., Springer Singapore, Singapore, 2018, pp. 83–108
X. Lei, Y. Chen, Z. Shao, Z. Chen, Y. Li, H. Zhu, J. Zhang, W. Zheng, T. Zheng, Bioresour. Technol. 198 (2015) 922–925
S. Gao, J. Yang, J. Tian, F. Ma, G. Tu, M. Du, J. Hazard. Mater. 177 (2010) 336–343
B.G. Ryu, J. Kim, J.I. Han, K. Kim, D. Kim, B.K. Seo, C.M. Kang, J.W. Yang, Algal Res. 31 (2018) 497–505
C.G. Alfafara, K. Nakano, N. Nomura, T. Igarashi, M. Matsumura, J. Chem. Technol. Biotechnol. 77 (2002) 871–876
N. Uduman, V. Bourniquel, M.K. Danquah, A.F.A. Hoadley, Chem. Eng. J. 174 (2011) 249–257
R. Misra, A. Guldhe, P. Singh, I. Rawat, F. Bux, Chem. Eng. J. 255 (2014) 327–333
F. Baierle, D.K. John, M.P. Souza, T.R. Bjerk, M.S.A. Moraes, M. Hoeltz, A.L.B. Rohlfes, M.E. Camargo, V.A. Corbellini, R.C.S. Schneider, Chem. Eng. J. 267 (2015) 274–281
A. Alyaqoobi, J. Eng. 16 (2010) 6198–6205
M. Khemis, G. Tanguy, J.P. Leclerc, G. Valentin, F. Lapicque, Process Saf. Environ. Prot. 83 (2005) 50–57
F. Akbal, S. Camcidotless, Desalination 269 (2011) 214–222
E. Brillas, C.A. Martínez-Huitle, Appl. Catal., B 166–167 (2015) 603–643
M. Bayramoglu, M. Kobya, O.T. Can, M. Sozbir, Sep. Purif. Technol. 37 (2004) 117–125
F. Ozyonar, B. Karagozoglu, 20 (2011) 173–179 (http://www.pjoes.com/pdf/20.1/pol.j.environ.stud.vol.20.no.1.173-179.pdf)
GlobalPetrolPrices.com, (n.d.) https://www.globalpetrol-prices.com/Iraq/electricity_prices/ (accessed July 19, 2019)
P.K. Holt, G.W. Barton, M. Wark, C.A. Mitchell, Colloids Surfaces A Physicochem. Eng. Asp. 211 (2002) 233–248
I. Branyikova, G. Prochazkova, T. Potocar, Z. Jezkova, T. Branyik, Fermentation 4 (2018) 93
R. Misra, A. Guldhe, P. Singh, I. Rawat, T.A. Stenström, F. Bux, Bioresour. Technol. 176 (2015) 1–7
M.G. Kiliç, Ç. Hoşten, Ş. Demirci, J. Hazard. Mater. 171 (2009) 247–252
J. Kim, B.G. Ryu, B.K. Kim, J.I. Han, J.W. Yang, Bioresour. Technol. 111 (2012) 268–275
D. Vandamme, S.C.V. Pontes, K. Goiris, I. Foubert, L.J.J. Pinoy, K. Muylaert, Biotechnol. Bioeng. 108 (2011) 2320–2329
D. Ghernaout, C. Benblidia, F. Khemici, Desalin. Water Treat. 54 (2015) 3328–3337
M.Y.A. Mollah, R. Schennach, J.R. Parga, D.L. Cocke, J. Hazard. Mater. 84 (2001) 29–41
M. Kobya, C. Ciftci, M. Bayramoglu, M.T. Sensoy, Sep. Purif. Technol. 60 (2008) 285–291
R. Henderson, S.A. Parsons, B. Jefferson, Water Res. 42 (2008) 1827–1845
M.K. Danquah, L. Ang, N. Uduman, N. Moheimani, G.M. Forde, J. Chem. Technol. Biotechnol. 84 (2009) 1078–1083
E.M. Grima, F.G. Acie, A.R. Medina, Y. Chisti, Biotech. Adv. 20 (2003) 491–515
H. AL-Hattab M, ghaly A, J Fundam Renew. Energy. 154 (2015) 1-26
J.C. Donini, J. Kan, J. Skynnarkarczuk, T.A. Hassan, K.L. Kar, Can. J. Chem. Eng. 72 (1994) 1007
E. Demirbas, M. Kobya, Process Saf. Environ. Prot. 105 (2017) 79–90
M. Kobya, E. Gengec, E. Demirbas, Chem. Eng. Process. Process Intensif. 101 (2016) 87–100.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
