DYNAMIC OPTIMIZATION OF LOW-DENSITY POLYETHYLENE PRODUCTION IN TUBULAR REACTOR UNDER THERMAL SAFETY CONSTRAINT
DOI:
https://doi.org/10.2298/CICEQ190108027AKeywords:
low-density polyethylene, tubular reactor, dynamic optimization, dynamic optimiz¬ation, thermal safetyAbstract
A commercial low-density polyethylene (LDPE) which is produced by the polymerization process of ethylene in the presence of initiators in a long tubular reactor is the most widely used in polymer industry. The highly exothermic nature of the LDPE polymerization process and the heating-cooling prerequisite in the tubular reactor can lead to various problems, particularly safety in terms of thermal runaway and productivity, i.e., decreasing monomer conversion. Therefore, model-based optimization of an industrial LDPE tubular reactor under thermal safety consideration is required to be implemented. A first principle model for this process is developed and validated using industrial data. Mass and energy balances have been derived from kinetics of LDPE polymerization. Thereafter, an expression of reactor temperature under critical condition is developed and incorporated in the reference model for the thermal safety study. In order to ensure the process is thermally safe and meets the desired product grade, the constrained dynamic optimization is proposed to maximize the conversion of the monomer using orthogonal collocation (OC). The dynamic optimization result shows that the maximum reaction temperature under critical condition constraint can be satisfied by optimizing the reactor jacket. Moreover, it is achieved without jeopardizing the monomer conversion and the product grade.
References
M.K. Chang, J. Ind. Eng. Chem. 27 (2015) 96-101
V.P. Haribal, Y. Chen, L. Neal, F. Li, Eng. J. 4 (2018) 714–721
LDPE EVA Market Outlook, Nexant, Inc., Asia Petrochemical Industry Conference, Japan, 2017, pp. 121-125
C.H. Chen, J.G Vermeychuk, J.A. Howell, P. Ehrlich, AIChE J. 22 (1976) 463–471
D. Muhammad, Z. Ahmad, N Aziz, IOP Conf. Ser.: Mater. Sci. Eng. 736 (2020) 042014
A. Azmi, N. Aziz, International J. Appl. Eng. Res. 11 (2016) 9906-9913
F.Z Yao, Master Thesis, Nanchang University, 2004
N. Agrawal, PhD Thesis, National University of Singa-pore, 2008
M. Asteasuain, A. Brandolin. Comput. Chem. Eng. 32 (2008) 396–408
A. Azmi, Sudibyo, S.A. Sata, N. Aziz, AIP Conference Proceedings, 2018
F. Stoessel, Thermal Safety of Chemical Processes: Risk Assessment and Process Design, Wiley-VCH, New York, 2008
M. Asteasuain, S. Pereda, M.H. Lacunza, P.E. Ugrin, A. Brandolin. Polym. Eng. Sci. 41 (2001) 711–726
J.S. Tse, Eng. J. 5 (2019) 421–433
A. Azmi, N. Aziz, Procedia Eng. 148 (2016) 1170-1176
C. Kiparissides, A. Baltsas, S. Papadopoulos, J.P. Congalidis, J.R. Richards, M.B. Kelly, Y. Ye, Ind. Eng. Chem. Res. 44 (2005) 2592–2605
D. Kim, P.D. Iedema, Chem. Eng. Sci. 59 (2004) 2039
–2052
R.C.M. Zabisky, W.M. Chan, P.E. Gloor, A.E. Hamielec, Polymer 33 (1992) 2243-2262
A. Buchelli, M.L. Call, A.L. Brown, A. Bird, S. Hearn, J. Hannon, Ind. Eng. Chem. Res. 44 (2005) 1474–1479
J.M. Coulson, J.F Richardson, J.R. Backhurst, J.H. Harker, Chemical Engineering: Fluid Flow, Heat Transfer and Mass Transfer, Vol. I, 5th ed., Butterworth-Heine¬mann, Oxford, 1996
A. Azmi, S. A. Sata, F.S. Rohman, N. Aziz, J. Phys.: Conf. Ser. 1349 (2019) 012094
H. Mavridis, C. Kiparissides, Polym. Proc. Eng. 3 (1985) 263-290
M Cizniar, Diploma Work, Slovak Technical University in Bratislava, 2005
J.E. Cuthrell, L.T. Biegler, AIChE J. 33 (1987) 1257–1270
E.S. Lopez-Saucedo, I.E. Grossmann, J.G. Segovia-Her¬nandez, S. Hernández, Chem. Eng. Res. Des 111 (2016) 83-99
D. Rodrigues, D. Bonvin, Optim. Control Appl. Methods (2019) 1–20
B.Houska, H. J. Ferreau, M. Diehl, Optim. Control Appl. Methods 32 (2011) 298–312
W. Yan, Y. Qian, W. Ma, B. Zhou, Y. Shen, F. Lin, Eng. J. (2017) 701–707
B. Srinivasan, S. Palanki, D. Bonvin, Comput. Chem. Eng. 27 (2003) 1-26
M. Vallerio, F. Logist, P.V. Erdeghem, C. Dittrich, J.V. Impe, Ind. Eng. Chem. Res. 52 (2013) 1656−1666
H.A. Zogg, "Zurich" Hazard Analysis: A Brief Introduction to the "Zurich" Method of Hazard Analysis Zurich Insur¬ance Group, Risk engineering, 1987.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
