CLEAN PRINTING PROCESS OF COTTON WITH NATURAL DYES: EFFECT OF PASTE FORMULATION COMPONENTS ON PRINTING PERFORMANCES
DOI:
https://doi.org/10.2298/CICEQ191004019BKeywords:
natural dyes, cleaner printing process, cotton fabrics, past formulation components, components effect, printing qualitiesAbstract
A novel natural dye Corchorus olitorius L. was investigated in the preparation of printing pastes for screen printing of cotton fabric. To ensure ecological printing, greener thickeners were used such as: sodium alginate, carboxymethyl cellulose and Ceratonia siliqua L. flour. The nature and concentration of thickener, dyestuff and urea concentrations, mordant type and fixation method were explored. Printed cotton fabric qualities were evaluated by determining different parameters: color strength, penetration percentage, printing fastnesses and mechanical properties, whereas print paste quality was evaluated by measuring its apparent viscosity. The higher dye concentration used in the printing paste led to better apparent viscosity and color strength levels. The increase of urea concentration improved the color strength, but reduced the apparent viscosity of printing paste. Best results of viscosity and color strength parameters were obtained using ferrous sulfate as a mordant and sodium alginate as a thickener, the results being 1346.67 mPa s-1 and 4.90, respectively. The resulting color shades varied from green to brown and very good color fastnesses was achieved, but depended mainly on the used experimental conditions.
References
A.D. Broadbent, Basic principles of textile coloration, Society of dyers and colorists, Bradford, 2001, pp. 493-526
L.W.C. Miles, Textile printing, Society of dyers and colorists, Bradford, 2003
K.T. Chung, S.E. Stevens, Jr., Environ. Toxicol. Chem. 12 (1993) 2121-2132
A.K. Yadav, C.K. Jain, D.S. Malik, Sustain. Environ. Res. 3 (2014) 95-102
W. Miled, S. Roudesli, A. Haj Said, J. Text. Apparel. Technol. Manage. 6 (2010) 1-6
F.M.D. Chequer, G.A. Rodrigues de Oliveira, E.R.A. Ferraz, J.C. Cardoso, M.V.B. Zanoni, D. Palma de Oliv¬eira, In Eco-friendly textile dyeing and finishing, M.Gunay (Ed.), Intech Open, London, 2013, pp.151-176
E. Ozturk, H. Koseoglu, M. Karaboyacı, N.O. Yigit, U. Yetis, M. Kitis, J. Clean. Prod. 130 (2016) 92-102
E. Ozturk, U. Yetis, F.B. Dilek, G.N. Demirer, J. Clean. Prod. 17 (2009) 239-247
F. Ferrero, M. Periolatto, G. Rovero, M. Giansetti, J. Clean. Prod.19 (2011) 1377-1384
N. Meksi, M. Ben Ticha, M. Kechida, M.F. Mhenni, J. Clean. Prod. 24 (2012)149-158
M. Ben Ticha, N. Meksi, N. Drira, M. F. Mhenni, Chem. Ind. Chem. Eng. Q. 20 (2014) 463-470
M. Ben Ticha, N. Meksi, N. Drira, M. F.Mhenni, Res. J. Text. Apparel 19 (2015)16-25
M. Ben Ticha, W. Haddar, N. Meksi, A. Guesmi, M.F. Mhenni, Carbohydr. Polym. 154 (2016) 287-295
F. Bouatay, N. Meksi, F. Slah, M.F. Mhenni, J. Text. Sci. Eng. 4 (2014)
F. Bouatay, N. Meksi, S. Adeel, F. Salah, F. Mhenni, J. Nat. Fibers 13 (2016) 423-436
D. Grandjean, S. Karelle, BE Pat. 1011895 A3 (2000)
G.A. Montero, C.B. Smith, W.A. Hendrix, D.L. Butcher, Ind. Eng. Chem. Res. 39 (2000) 4806-4812
N. Meksi, A. Moussa, J. Clean. Prod.161 (2017) 105-126
V. Tiwari, P.S. Vankar, Colourage. 48 (2001) 25-28
T. Bechtold, A. Turcanu, J. Clean. Prod. 17 (2009) 1669-1679
T. Bechtold, A. Turcanu, E. Ganglberger, S. Geissler, J. Clean. Prod.11 (2003) 499-509
J.J. Long, H.M. Xu, C.L. Cui, X.C. Wei, F. Chen, A.K. Cheng, J. Clean. Prod. 65 (2014) 574-582
Centexbel, Textile dyeing in ionic liquids, Textile dyeing in ionic liquids, http://www.centexbel.be/projects/textile-dyeing-in-ionic-liquids. 2012 (accessed 7 June 2012)
T. Agnhage, A. Perwuelz, N. Behary, J. Clean. Prod. 70 (2017) 61-67
M. Shahid, S. Ul-Islam, F. Mohammad, J. Clean. Prod. 53 (2013) 310-331
M. Kamel, R.M. El-Shishtawy, B.M. Youssef, H. Mashaly, Dyes Pigm. 73 (2005) 103-110
M. Montazer, M. Parvinzadeh, Fiber. Polym. 8 (2007) 181-185
P.S. Vankar, S. Rakhi, W. Samudrika, Pigm. Resin. Technol. 38 (2009) 242-247
H. Gouila, N. Meksi, W. Haddar, M.F. Mhenni, H.B. Jannet, Ind. Crop. Prod. 35 (2012) 31-36
W. Haddar, N. Baaka, N. Meksi, M. Ben Ticha, A. Gu-esmi, M.F. Mhenni, Fiber. Polym. 16 (2015) 1506-1511
W. Haddar, M. Ben Ticha, N. Meksi, A. Guesmi, Nat. Prod. Res. 32 (2018) 141-148
M. Ben Ticha, N. Meksi, H.E. Attia, W. Haddar, A. Guesmi, H. Ben Jannet, M. F. Mhenni, Dyes. Pigm. 141 (2017) 103-111
M. Rekaby, A.A. Salem, S.H. Nassar, J. Text. Inst. 100 (2009) 486-495
D. Maamoun, H. Osman, S.H. Naasar, J. Int. Environ. App. Sci. 9 (2014) 90-99
A.T. Özguney, P. Seçim, A. Demir, T. Gulumser, E.Özdogan, Text. Confect. 25 (2015) 166-171
S. Babel, R. Gupta, J. Textile. Sci. Eng. 6 (2016) 230
A. Ragheb, S. Tawfik, J.I. Abd –El Thalouth, M.M. Mosaad, Int. J. Phar. Sci. Res. 919 (2017) 611-620
J.I. Abd –El Thalouth. J. Am. Sci. 7 (2011) 623-640
S.N. Chattopadhayay, N.C. Pan, J. Nat. Fibers 16 (2019) 1077-1088
O.A. Hakeim, A. Abou-Okeil, L.A.W. Abdob, A. Waly, J. App. Polym. Sci. 97 (2005) 559-563
M.D. Teli, J. Sheikh, P. Shastrakar, J. Text. 2013, Article ID 320510
A.A. Hebeish, A.A. Shahin, M. Rekaby, A.A. Ragheb, Egypt. J. Chem. 58 (2015) 659-670
A.A. Hebeish, A.A. Ragheb, S.H. Nassar, E.E. Allam, J.I. A. EI Thalouth, J. App. Polym. Sci. 102 (2006) 338-347
H.M. El-Hennawy, K.A. Ahmed, I. Abd–El Thalouth, Ind. J. Fibre Text. 37 (2012) 145-249
S. İlhan, F. Savaroglu, F. Çolak, J. Ethnopharmacol. 89 (2007) 55-59
M. Loumerem, A. Alercia, Genet. Resour. Crop. Evol. 63 (2016) 1103-1111
K. Mibei, N.K. Ojijon, S.M. Karanja, J.K. Kinyua, Annals: Food. Sci. Tech. 1 (2012) 37-42
P. Kubelka, J. Opt. Soc. Am. 38 (1948) 448-457
P. Kubelka, J. Opt. Soc. Am. 44 (1954) 330-334
A.N. Derbyshire, W.N. Marshall, J. Soc. Dyers. Col. 96 (1980) 166-167
E.P.A. Kumbasar, M. Bide, Dyes. Pigm. 47 (2000)189-199
D.O. Çatal, A.T. Özguney, E.P.A. Kumbasar, Text. Confect. 22 (2012) 309-316
L. Wang, F. Zhu, J. Shao, Q. Yang, D. Lu, Cellulose 20 (2013) 2125-2135
A.D. Broadbent, Basic principles of textile coloration, Society of dyers and colorists, Bradford, 2001, pp. 533-536
A.D. Broadbent, Basic principles of textile coloration, Society of dyers and colorists, Bradford, 2001, pp. 565-568
S. E. A. Nahed, Y.A. Youssef, R.M. El-Shishtawy, A.A. Mousa, Color. Technol. 122 (2006) 324-32
E.K. Hwang, Y.H. Lee, H.D. Kim, Fiber. Polym. 9 (2008) 334-340
E.M.R. El-Zairy, Autex Res. J. 11 (2011) 66-70
M.G. Uddin, J. Text. 10 (2014) 1-8
C.W.M. Yuen, S.K.A. Ku, P.S. Choi, C.W. Kan, Fiber. Polym. 5 (2004) 117-121.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.