Gas-liquid dispersion agitated by closed turbine type impeller
Original scientific paper
DOI:
https://doi.org/10.2298/CICEQ240411027YKeywords:
gas-liquid agitation, closed turbine type impeller, gas cavity, impeller region, power characteristicsAbstract
Gas-liquid agitation by a turbine type impeller having shrouds structurally (closed disk turbine impeller, CDT) was studied by examination of the flow behavior of gas-liquid mixture in the impeller region, with energy consideration based on the impeller power characteristics in the gassed liquid. The way in formation of the gas cavities and dispersion as the gas bubbles using the CDT differed from that using a conventional disk turbine impeller (open impeller, ODT). The difference in relative power consumption, i.e., ratio of gassed to ungassed power consumption, between the CDT and ODT was related to the configurations of the gas cavities.
References
G.M. Mule, A.A. Kulkarni, Chem. Ind. Dig. July (2015) 58-64. https://www.researchgate.net/publication/358901096
H.R. Lee, Y.J. Huh, C.S. Choi, W.H. Lee, Kor. J. Chem. Eng. 9 (1992) 164-168. https://doi.org/10.1007/BF02705134
V.V. Ranade, V.R. Deshpande, Chem. Eng. Sci. 54 (1999) 2305-2315. https://doi.org/10.1016/S0009-2509(98)00301-7
V.V. Ranade, M. Perrard, C. Xuereb, N. Le Sauze, J. Bertrand, Chem. Eng. Res. Des. 79 (2001) 957-964. https://doi.org/10.1205/02638760152721190
M. Mochizuki, H. Sato, Y. Doida, Y. Saita, T. Amanuma, T. Takahashi, Kagaku Kogaku Ronbunshu 34 (2008) 557-561. https://doi.org/10.1252/kakoronbunshu.34.557
F. Maluta, A. Paglianti, G. Montante, Chem. Eng. Sci. 241 (2021) 116677. https://doi.org/10.1016/j.ces.2021.116677
C. Yang, H. Lu, B. Wang, Z. Xu, B. Liu, Chem. Eng. Sci. 280 (2023) 119058. https://doi.org/10.1016/j.ces.2023.119058
F. Maluta, F. Alberini, A. Paglianti, G. Montante, Chem. Eng. Res. Des. 194 (2023) 582-596. https://doi.org/10.1016/j.cherd.2023.05.006
R. Sardeing, J. Aubin, C. Xuereb, Chem. Eng. Res. Des. 82 (2004) 1589-1596. https://doi.org/10.1205/cerd.82.12.1589.58030
Z. Zheng, D. Sun, J. Li, X. Zhan, M. Gao, Chem. Eng. Res. Des. 130 (2018) 199-207. https://doi.org/10.1016/j.cherd.2017.12.021
D. Gu, Y. Mei, L. Wen, X. Wang, Z. Liu, J. Taiwan Inst. Chem. Eng. 121 (2021) 20-28. https://doi.org/10.1016/j.jtice.2021.03.038
D. Li, W. Chen, Process Saf. Environ. Prot. 158 (2022) 360-373. https://doi.org/10.1016/j.psep.2021.12.019
F. Saito, A.W. Nienow, S. Chatwin, I.P.T. Moore, J. Chem. Eng. Jpn. 25 (1992) 281-287. https://doi.org/10.1252/jcej.25.281
J. Zhao, Z. Gao, Y. Bao, Chin. J. Chem. Eng. 19 (2011) 232-242. https://doi.org/10.1016/S1004-9541(11)60160-2
B.H. Junker, M. Stanik, C. Barna, P. Salmon, E. Paul, B.C. Buckland, Bioprocess Eng. 18 (1998) 401-412. https://doi.org/10.1007/s004490050463
M. Cooke, P.J. Heggs, Chem. Eng. Sci. 60 (2005) 5529-5543. https://doi.org/10.1016/j.ces.2005.05.018
G. Montante, A. Paglianti, Chem. Eng. J. 279 (2015) 648-658. http://dx.doi.org/10.1016/j.cej.2015.05.058
D. Gu, L. Wen, H. Xu, M. Ye, J. Taiwan Inst. Chem. Eng. 143 (2023) 104688. https://doi.org/10.1016/j.jtice.2023.104688
M. Yoshida, H. Ebina, K. Ishioka, K. Oiso, H. Shirosaki, R. Tateshita, Int. J. Chem. React. Eng. 15 (2017) 20160198. https://doi.org/10.1515/ijcre-2016-0198
M. Yoshida, H. Ebina, H. Shirosaki, K. Ishioka, K. Oiso, Braz. J. Chem. Eng. 32 (2015) 865-873. https://doi.org/10.1590/0104-6632.20150324s00003682
J.C. Middleton, in Mixing in the process industries, N. Harnby, M.F. Edwards, A.W. Nienow Eds., Butterworth-Heinemann, Oxford (1992), pp. 322-363. ISBN-13: 978-0750637602
W. Bruijn, K. van’t Riet, J.M. Smith, Trans. Inst. Chem. Eng. 52 (1974) 88-104. ISSN: 0046-9858
K. van’t Riet, J.M. Smith, Chem. Eng. Sci. 28 (1973) 1031-1037. https://doi.org/10.1016/0009-2509(73)80005-3
K. Brun, R. Kurz, Int. J. Rotating Mach. 1 (2005) 45-52. https://doi.org/10.1155/IJRM.2005.45
C. Wu, K. Pu, C. Li, P. Wu, B. Huang, D. Wu, Energy 246 (2022) 123394. https://doi.org/10.1016/j.energy.2022.123394
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Masanori Yoshida, Toshiki Kosaka, Yoshiki Mukai, Koichi Nakahara, Reno Kiyota
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
