Chemical process effects on sloped surface with changing mass and consistent temperature
Original scientific paper
DOI:
https://doi.org/10.2298/CICEQ231212023GKeywords:
tilted surface, thermal transfer, mass transmission, chemical reaction, Laplace transform methodAbstract
The research extensively investigated the turbulent flow patterns surrounding an unbounded inclined plate under the conditions of uniform temperature and variable mass dispersion. Throughout this analysis, the study thoroughly considered the impact of chemical reactions within the system. Focusing on the harmonic inclination of the plate within its plane, the study employed the LT approach to accurately solve the non-dimensional governing equations. In scrutinizing various profiles, the investigation examined the impact of several crucial physical factors: chemical response variable, Schmidt number, thermal Grashof number, mass Grashof number, and duration. This study delves into the intricate influence of various factors on the complex flow dynamics surrounding inclined plates, specifically focusing on heat and mass transfer phenomena. By examining these relationships, the research provides crucial insights into improving the efficiency of thermal and mass transmission processes within systems that incorporate tilted surfaces. Moreover, this knowledge can potentially contribute to advancements in various fields, from renewable energy systems to manufacturing processes, where heat and mass transfer play pivotal roles.
References
O.A. Bég, T.A. Bég, A.Y. Bakier, V.R. Prasad, Int. J. Appl. Math. Mech. 5(2) (2009) 39–57. https://www.scirp.org/reference/referencespapers?referenceid=207616
O. Aydm, A. Kaya, Heat Mass Transfer 46 (2009) 129–136. https://sci-hub.wf/10.1007/s00231-009-0551-4
R. Muthucumaraswamy, G. Nagarajan, V.S.A. Subramanian, Ann. Fac. Eng. Hunedoara 8 (2010) 220-225.https://annals.fih.upt.ro/pdf-full/2010/ANNALS-2010-3-45.pdf
R. Muthucumaraswamy, Chem. Ind. Chem. Eng. Q. 16 (2010) 167−173. https://doi.org/10.2298/CICEQ091231024M
V. Bisht, M. Kumar, Z. Uddin, J. Appl. Fluid Mech. 4 (2011) 59–63. https://doi.org/10.36884/jafm.4.04.11947
M. Sundar Raj, R. Muthucumaraswamy. V.S.A. Subramanian, Int. J. Appl. Mech. Eng. 16(3) (2011) 885-891. https://www.infona.pl/resource/bwmeta1.element.baztech-article-BPZ5-0017-0038
O.D. Makinde, ZNA 67a (2012) 239–247. https://doi.org/10.5560/zna.2012-0014
P. Rana, R. Bhargava, O.A. Bég, Comput. Math. Appl. 64 (2012) 2816–2832. https://doi.org/10.1016/j.camwa.2012.04.014
M.S. Alam, M. Ali, M.D. Delowar Hossain, Int. J. Eng. Sci. 2(7) (2013) 81–88. https://www.theijes.com/papers/v2-i7/Part.6/K0276081088.pdf
R. Muthucumaraswamy, L. Jeyanthi, ARPN J. Eng. Appl. Sci. 10(20) (2015) 9596-9603 http://www.arpnjournals.org/jeas/research_papers/rp_2015/jeas_1115_2914.pdf
M. Narahari, S. Tippa, R. Pendyala, M.Y. Nayan, Recent Adv. Appl. Theor. Mech., Proc. WSEAS Int. Conf. (MECHANICS '15), 11th, 126–137 (2015).http://www.wseas.us/e-library/conferences/2015/Malaysia/APTHME/APTHME-15.pdf
H. Mondal, D. Pal, S. Chatterjee, P. Sibanda, Ain Shams Eng. J. 8 (2016) 2111–2121. https://doi.org/10.1016/j.asej.2016.10.015
Farjana Akter, Md. Manjiul Islam, Ariful Islam, Md. Shakhaoath Khan, Md. Saddam Hossain, Open Journal of Fluid Dynamics. 6 (2016) 62-74. http://dx.doi.org/10.4236/ojfd.2016.61006
Jyotsna Rani Pattnaik, Gouranga Charan Dash, Suprava Singh, Ain Shams Engineering Journal. 8(1) (2017) 67-75 http://dx.doi.org/10.1016/j.asej.2015.08.014
S. Khalid, M.A. Kamal, U. Rasheed, S. Farooq, S. Kussain, H. Waqas, J. Appl. Environ. Biol. Sci. 7(5) (2017) 154–165. https://www.textroad.com/pdf/JAEBS/J.%20Appl.%20Environ.%20Biol.%20Sci.,%207(5)154-165,%202017.pdf
S.V. Sailaja, B. Shanker, R. Srinivasa Raju, J. Nanofluids 6(3) (2017) 420-435. https://doi.org/10.1166/jon.2017.1337
R.K. Dhal, B. Jena, P.M. Sreekumar, Int. Res. J. Adv. Eng. Sci. 2(2) (2017) 299-303. http://irjaes.com/wp-content/uploads/2020/10/IRJAES-V2N2P239Y17.pdf
U.S. Rajput, Gaurav Kumar, Jordanian J. Mech. Ind. Eng. 11(1) (2017) 41-49. https://jjmie.hu.edu.jo/vol%2011-1/JJMIE-13-16-01.pdf
S. Agarwalla, N. Ahmed, Heat Transfer-Asian Res. (2017) 1-15. https://sci-hub.wf/10.1002/htj.21288
H. Mondal, D. Pal, S. Chatterje, P. Sibanda, Ain Shams Eng. J. 9(4) (2018) 2111-2121. https://doi.org/10.1016/j.asej.2016.10.015
M. Ahmad, M.A. Imran, M. Aleem, I. Khan, J. Therm. Anal. Calorim. 137 (2019) 1783 – 1796. https://doi.org/10.1007/s10973-019-08065-3
A. Sandhya, G.V. RamanaReddy, G.V.S.R. Deekshitulu, Int. J. Appl. Mech. Eng. 25 (3) (2020) 86-102. https://doi.org/10.2478/ijame-2020-0036
T.L. Oyekunle, S.A. Agunbiade, Oyekunle, A. Gunbiade, J. Egypt. Math. Soc. 28(51) (2020) 1-19. https://doi.org/10.1186/s42787-020-00110-7
S. ThamizhSuganya, P. Balaganesan, L. Rajendran, M. Abukhaled, Eur. J. Pure Appl. Math. 13(3) (2020). https://doi.org/10.29020/nybg.ejpam.v13i3.3730
A.S. Idowu, B.O. Falodun, Arab. J. Basic Appl. Sci. 27(1) (2020) 149–165. https://doi.org/10.1080/25765299.2020.1746017
M.B. Riaz, A. Atangana, S.T. Saeed, in Fractional Order Analysis: Theory, Methods and Applications, H. Dutta, A.O. Akdemir, A. Atangana, Eds., John Wiley & Sons Inc., (2020) 253–282. https://sci-hub.se/https://doi.org/10.1002/9781119654223.ch10
P.K. Dadheech, P. Agrawal, A. Sharma, A. Dadheech, Q. Al-Mdallal, S.D. Purohit, Case Stud. Therm. Eng. 28 (2021) 101491. https://doi.org/10.1016/j.csite.2021.101491
A.A. Zafar, J. Awrejcewicz, G. Kudra, N.A. Shah, S.-J. Yook, Case Stud. Therm. Eng. 27 (2021) https://doi.org/10.1016/j.csite.2021.101249
D.P.C. Rao, S. Thiagarajan, V. Srinivasakumar, Heat Transfer 50 (7) (2021) 7120-7138. https://onlinelibrary.wiley.com/doi/10.1002/htj.22220
K. Raghunath, N. Gulle, R.R. Vaddemani, O. Mopuri, Heat Transfer 51(3) (2021) 2742-2760 https://onlinelibrary.wiley.com/doi/10.1002/htj.22423
R. Vijayaragavana, V. Bharathib, J. Prakash, Indian J. Pure Appl. Phys. 59 (2021) 28-39. https://pdfs.semanticscholar.org/7d14/5f4f87013207ba593f8d93ed60d2030d028d.pdf
C. PavanKumar, K. Raghunath, M. Obulesu, Turk. J. Comp. Math. Edu. 12(13) (2021) 960-977.https://turcomat.org/index.php/turkbilmat/article/view/8584/6710
R. SureshBabu, T. SaravanKumar, M.V. Govindaraju, B. Mallikarjuna, Biointerface Res. Appl. Chem. 11(5) (2021) 13252-13267. https://doi.org/10.33263/BRIAC115.1325213267
Raghunath Kodi, Obulesu Mopuri, Heat Transfer 51 (2021) 733-752 https://doi.org/10.1002/htj.22327
S.G. Bejawada, W. Jamshed, R. Safdar, Y.D. Reddy, M.M. Alanazi, H.Y. Zahran, M.R. Eid, Coatings 12(2) (2022) 151. https://doi.org/10.3390/coatings12020151
H.I. Osman, N.F.M. Omar, D. Vieru, Z. Ismail, J. Adv. Res. Fluid. Mech. Therm. Sci. 92(1) (2022) 18-27. https://doi.org/10.37934/arfmts.92.1.1827
B.K. Tad, N. Ahmed, Biointerface. Res. Appl. Chem. 12(5) (2022) 6280-6296. https://biointerfaceresearch.com/wp-content/uploads/2021/11/20695837125.62806296.pdf
G. Nagarajan, M. SundarRaj, R. Muthucumaraswamy, Int. J. Appl. Mech. Eng. 27(4) (2022) 105-116. https://doi.org/10.2478/ijame-2022-0053
B.C. Nhial, V.S. HariBabu, V.N. Vellanki, G.Y. Sagar, JPSP 6(5) (2022) 697–706. https://journalppw.com/index.php/jpsp/article/view/5861/3858
K. Raghunath, N. Gulle, R. R. Vaddemani, O. Mopuri, Heat Transfer 51(3) (2022) 2742-2760. https://doi.org/10.1002/htj.22423
R. MohanaRamana, K. VenkateswaraRaju, K. Raghunath, Heat Transfer 51(7) (2022) 6431-6449. https://doi.org/10.1002/htj.22598
N. Shehzad, A. Zeeshan, M. Shakeel, R. Ellahi, S. M. Sait, Coatings 12(430) (2022) 1-25. https://doi.org/10.3390/coatings12040430
A. Raza, U. Khan, Z. Raizah, S.M. Eldin, A.M. Alotaibi, S. Elattar, A.M. Abed, Symmetry 14 (2022) 2412. https://www.mdpi.com/2073-8994/14/11/2412
P. Sivakumar, R. Muthucumaraswamy, Gis Sci. J. 9(1) (2022) 167-177. 1869-9391. https://drive.google.com/file/d/1DKDzhYzeHz1QWap1sh_dTcDFXAfyvDl-/view
K. Raghunath, O. Mopuri, Heat Transfer, 51 (2022), 733-752. https://doi.org/10.1002/htj.22327
M. SundarRaj, G. Nagarajan, V.P. Murugan, R. Muthucumaraswamy, Int. J. Appl. Mech. Eng. 28(2) (2023) 64-76. https://www.ijame-poland.com/pdf-168439-91810?filename=Impacts%20of%20chemical.pdf
N.S. Wahid, N.M. Arifin, N.S. Khashi, I. Pop, Alexandria Eng. J. 66 (2023) 769–783. https://doi.org/10.1016/j.aej.2022.10.075
J.S. Huang, Journal of Mechanics, 39(2023) 88-104 https://doi.org/10.1093/jom/ufad006
B. Prabhakar Reddy, M.H. Simba, Alfred Hugo, Hindawi International Journal of Chemical Engineering. Article ID 9342174 (2023) https://doi.org/10.1155/2023/9342174
K.V. Raju, R. Mohanaramana, S. Sudhakar Reddy, K. Raghunath, Communications in Mathematics and Applications. 14(1) (2023) 237-255 https://doi.org/10.26713/cma.v14i1.1867
R. Rajaraman, R. Muthucumaraswamy, Chem. Ind. Chem. Eng. Q. 30 (3) 223-230 (2024) https://doi.org/10.2298/CICEQ230526025R
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Nagarajan Gnanavel, Sundar Raj Mariadoss, Venkatesan Jayavelu, Venkata Mohan Reddy Polaka, Muthucumaraswamy Rajamanickam
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
