PREPARATION AND PHYSICOCHEMICAL PROPERTIES OF NATURALLY GROWN GREEN SPIROGYRA ALGAE BIODIESEL
Scientific paper
DOI:
https://doi.org/10.2298/CICEQ220215015KKeywords:
algae biodiesel, algae cultivation, fuel propertiesAbstract
In this study, biodiesel was produced from a naturally grown green algae (Spirogyra). The algae were cultivated in an open pond for 180 days without any fertilizers or nutrients. The dried algae powder to oil yield and significant fuel properties of viscosity, density, cetane number, calorific value, flash point, pour, and cloud points are investigated for B10 to B100 blends. The results of solvent oil extraction show that at a 1:2 (algae powder to solvent) ratio and 65 °C, algae oil yield was 22.66%. Furthermore, Box-Behnken assisted response surface optimization technique was implemented. From the 29 random experiments, 96.24% Spirogyra algae oil biodiesel (SAOBD) yield was achieved under the optimum conditions of 50 °C, 180 minutes, the molar ratio of 9:1, and catalyst concentration of 0.5 wt%. The fatty acid composition reveals that 73.95 wt% saturated FAC was observed in SAOBD. The significant fuel properties are measured by following ASTM-D6751 standards, and 40% SAOBD in diesel fuel could be an optimum blend ratio for engine experimentation. Finally, regression equations with high correlation coefficients (R2) were developed to predict the various blend ratios for the fuel properties.
References
V. Ahire, M. Shewale, A. Razban, Arch. Comput. Methods Eng. 28 (2021) 4897—4915. https://doi.org/10.1007/s11831-021-09558-x.
I. Ambata, V. Srivastavaa, M. Sillanpääa, Renewable Sustainable Energy Rev. 90 (2018) 356—369. https://doi.org/10.1016/j.rser.2018.03.069.
S.G. Mungodla, L.Z. Linganiso, S. Mlambo, T. Motaung, J. Eng. Des. Technol. 17 (2019) 670—704. https://doi.org/10.1108/JEDT-07-2018-0111.
C.G. Khoo, Y.K. Dasan, M.K. Lam, K.T. Lee, Bioresour. Technol. 292 (2019) 121964. https://doi.org/10.1016/j.biortech.2019.121964.
A. Jacob, B. Ashok, A. Alagumalai, O.H. Chyuan, P.T.K. Le, Energy Convers. Manage. 228 (2021) 113655. https://doi.org/10.1016/j.enconman.2020.113655.
P. Mäki-Arvela, I. Hachemi, D.Y. Murzin, J. Chem. Technol. Biotechnol. 89 (2014) 1607—1626. https://doi.org/10.1002/jctb.4461.
X. Zhai, C. Zhu, Y. Zhang, H. Pang, F. Kong, J. Wang, Z. Chi, Sci. Total Environ. 738 (2020) 139439. https://doi.org/10.1016/j.scitotenv.2020.139439.
P. Mehta, R. Rani, R. Gupta, A.S. Mathur, S.K. Puri, Algal Res. 36 (2018) 88— 95. https://doi.org/10.1016/j.algal.2018.10.015.
J. Masojídek, G. Torzillo, Encycl. Ecol. (2008) 2226—2235. https://doi.org/10.1016/B978-008045405-4.00830-2.
Widayat, J. Philia, J. Wibisono, E3S Web Conf., 2nd Int. Conf. Energy, Environ. Inf. Syst. (ICENIS 2017), 31, Semarang, Indonesia, (2018) p.3. https://doi.org/10.1051/e3sconf/20183104009.
M. Setiyo, T.A. Purnomo, D. Yuvenda, M.K. Biddinika, N.A.C. Sidik, O.D. Samuel, A. Kolakoti, A. Calam, Mech. Eng. Soc. Ind. 1 (2021) 3—6. https://doi.org/10.31603/mesi.5309.
S.Y. Teng, G.Y. Yew, K. Sukačová, P.L. Show, V. Máša, J.S. Chang, Biotechnol. Adv. 44 (2020) 107631. https://doi.org/10.1016/j.biotechadv.2020.107631.
A. Kolakoti, M. Setiyo, B. Waluyo, Mech. Eng. Soc. Ind. 1 (2021) 22—30. https://doi.org/10.31603/mesi.5320.
S. Prabakaran, T. Mohanraj, A. Arumugam, Renewable Energy 180 (2021) 353—371. https://doi.org/10.1016/j.renene.2021.08.073.
S.P. Singh, P. Singh, Renewable Sustainable Energy Rev. 50 (2015) 431— 444. https://doi.org/10.1016/j.rser.2015.05.024.
G. Bhargavi, P.N. Rao, S. Renganathan, IOP Conf. Ser. Mater. Sci. Eng. Hyderabad, India, 330 (2018) 012024. https://doi.org/10.1088/1757-899X/330/1/012024.
A. Kolakoti, G. Satish, Aust. J. Mech. Eng. (2020) 1—13. https://doi.org/10.1080/14484846.2020.1842298.
S. Prabakaran, T. Mohanraj, J. Mech. Sci. Technol. 35 (2021) 4765—4773. https://doi.org/10.1007/s12206-021-0942-0.
I. Barabás, I.A. Todoruţ, in Textbook of Biodiesel-Quality, Emissions and By-Products, In Tech Open book series, G. Montero Ed., London (2011) p.3—28. ISBN: 978-953-307-784-0; EBOOK (PDF) ISBN: 978-953-51-4402-1.
A. Kolakoti, B.V.A. Rao, Biofuels 10 (2019) 591—605. https://doi.org/10.1080/17597269.2017.1332293.
A. Kolakoti, B. Prasadarao, K. Satyanarayana, M. Setiyo, H. Köten, M. Raghu, Automot. Exper. 5 (2022) 3—15. https://doi.org/10.31603/ae.6171.
B. Prasadarao, A. Kolakoti, P. Sekhar, Recent Adv.
Comput. Sci. Commun. 14 (2021) 1824—1832. https://doi.org/10.2174/2666255813666191204143202.
S.Prabakaran, R.Manimaran, T.Mohanraj, M.Ravikumar, Mater. Today: Proc. 45 (2021) 2784—2788. https://doi.org/10.1016/j.matpr.2020.11.742.
F. Yasar, Fuel 264 (2020) 116817. https://doi.org/10.1016/j.fuel.2019.116817.
V.A.R. Basava, A. Kolakoti, P.R. Kancherla, in Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering, Leonid Burstein, IGI Global, Hershey (2021), p.25—53. https://doi.org/10.4018/978-1-7998-4939-1.ch002.
A. Kolakoti, B.V.A. Rao, Int. J. Automot. Mech. Eng. 17 (2020) 8052— 8066. https://doi.org/10.15282/ijame.17.2.2020.23.0604.
N. Acharya, P. Nanda, S. Panda, S. Acharya, Eng. Sci. Technol. Int. J. 20 (2017) 511—517. https://doi.org/10.1016/j.jestch.2016.12.005.
N.S. Dugala, G.S. Goindi, A. Sharma, J. King. Saud. Univ. Eng. Sci. 33 (2021) 424—436. https://doi.org/10.1016/j.jksues.2020.05.006.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Teku Kalyani, L. S .V . Prasad, Aditya Kolakoti
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements thereof:
- the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
- the right to produce prepublications, reprints, and special editions of the Manuscript;
- the right to translate the Manuscript into other languages;
- the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
- the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
- the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
- the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.